General College Physics

Wisconsin Lutheran High School

Week 30 (Mar. 17 - 21)

Reading: The nature of light and the laws of geometric optics (Chap. 35)

Key Topics: the speed of light, ray approximation, reflection, refraction, dispersion, total internal reflection, prisms and rainbows

Geometric optic Lab:

Tape a large piece of white paper to a flat piece of cardboard or cork board. Using supports, stand up two flat mirrors in the center of the cork board.
Begin with the mirrors in a straight line. Use a pencil to trace the location of the mirrors on the paper. Now insert a stick pin into the cardboard a few centimeters in front of the silvered face of the mirrors. Look at the image of the pin formed in the mirrors. Now attempt to place a second stick pin behind the mirrors so that its location is exactly where the image of the first pin appears. Take a photo of your setup for your lab book. Now use a small ruler to measure the distance between the pin in front of the mirror and the pin behind the mirror. Are the object (the first pint) and the image (the second pin) equidistant from the mirror? Next, draw an eye on the paper behind the pin but a bit off to one side of the pin. This represents a position from which the image can be observed. Then use a straight-edge to trace the path of a ray of light that travels from the stick pin, bounces from the mirror, and finally arrives at the position of the observing eye. Remember that the ray must obey the law of reflection! Before going on, be sure to write down your procedure and results in your laboratory notebook. Your lab notebook should include your ray-tracing diagram.
Repeat this experiment, but now with the mirrors separated by 90 degrees (they are arranged at a right angle). Trace the mirrors on the paper. Put the pin a few cm from the joint and equidistant from the mirror faces. How many images do you now see? Once again, insert pins at the locations of the images, to the best of your ability. Do you notice a symmetrical arrangement of the images? Again, draw an eye behind the pin, and trace the rays of light coming from the object, bouncing from the mirror, and arriving at the eye. Be sure that the ray always obeys the law of reflection when it bounces from a mirror! Record your results and your ray-tracing diagram in your laboratory notebook.
Repeat the experiment with the mirrors separated by 60 degrees and, if possible, 45 degrees. For each of these, record your results and your ray-tracing diagram in your laboratory notebook.

Week 30 Homework Problems:

Ray bouncing from V-mirrors: Suppose that two flat mirrors are stood up on a table top in a v-configuration so that there is a 60 degree angle between their mirrored surfaces, which face one another. A ray of light is fired across the table toward the mirrors. It enters the region between the mirrors so that there is a 30 degree angle between the ray and each of the mirrors' surfaces.

If the ray does not strike at the vertex (junction) of the mirrors, then how many times will the ray bounce from the mirrors before escaping? Make a ray diagram to illustrate how you solved this problem geometrically.
What if the beam makes an angle of 15 deg ( instead of 30 degrees) with one of the surfaces?

Hanging mirror: A man stands 100 cm in front of a mirror that is 50 cm high. He holds a two-meter long tape-measure against his body so that the top of the tape measure is at the level of his eyes and the two-meter mark on the tape measure is at the level of his feet. The mirror is hanging on the wall so that the top of the mirror is level with his eyes.

Can the man see the entire length of the tape measure? If not, then what portion of the tape measure can he see when he looks in the mirror? Draw a picture with a ray diagram to illustrate how you solved this problem using geometry.
What if the mirror is now tipped away from the wall so that the top of the mirror is 95 cm away from his eyes and the bottom is still 100 cm away from him? Which portion of the tape measure can the man now see? Draw a picture with a ray diagram to illustrate how you solved this problem using geometry.
If the mirror was curved (convex), could he see more or less of the tape measure? What about if it was concave?

General College Physics

Return to course website.

Course syllabus

General College Physics is a year-long introductory college-level course for advanced (typically junior or senior level) students at Wisconsin Lutheran High School. It is a dual-credit course offered at Wisconsin Lutheran High School in collaboration with Wisconsin Lutheran College. This means that students enrolled in the course have the option of receiving credit for a four-credit algebra-based laboratory science course from the College.

During the first semester, we will primarily study the science of motion and its relationship to forces. Topics include: dimensional analysis, measurement, uncertainty, estimation, 2 dimensional kinematics, projectile motion, newton’s laws of motion, force diagrams, centripetal force, circular motion, conservation of energy and momentum, torque, angular momentum, oscillations, and gravity. During the second semester, we will explore a number of inter-related topics including: heat, thermometry, the laws of thermodynamics, electricity, magnetism, optics, electromagnetic induction, radiation, atomic theory, and nuclear physics.

Emphasis on theoretical topics, careful thinking, laboratory experiments, and problem solving makes this course challenging. My aim is to help you succeed in this course, and to have fun while learning physics. So please do not hesitate to contact me with any problems you may run into this semester!

Course textbook: The course will be organized around a book: the Pocket Guide to accompany Physics for Scientists and Engineers (4th edition) by Serway. (I’ll call this PSE for short.) I would highly recommend obtaining a copy of this book. It is inexpensive, compact, and well-written. It will make a very handy addition to your home science library. If you don't want to buy it, I will have copies to loan out for the semester.

Course time and location: The course meets on a rotating schedule in WLHS 223—the science wing on the first floor of WLHS.

Professor: Dr. Kuehn from Wisconsin Lutheran College (WLC) is the professor for this course. Contact info: kerry.kuehn[at]wlhs.org

Registration for College Credit: Wisconsin Lutheran College is requiring students in this course who are interested in obtaining college credit. Please apply in the application link below for each class you are wishing to apply for college credit. This must be approved by Friday, September 27.

https://admissions.wlc.edu/register/foundations

Once students apply we will wait for Wisconsin Lutheran College to confirm eligibility and requirements for college credit and communicate out further information. Please reach out to Mr. Davis if you have any questions.

Teaching Assistant contact info: The Wednesday course sections (beginning in September) will be overseen by a teaching assistants. Alyssa Ebeling is an upper-level physics major at Wisconsin Lutheran College. Contact info: alyssa.ebeling[at]wlc.edu

Course websites: In addition to the course information provided through WLHS’s OnCampus system, we will be also using a website I’ve designed for this course: www.greatphysics.com/WLHS/

Homework exercises: I will assign weekly homework problems. These are designed to deepen your understanding of lecture material and to prepare you for the quizzes and tests. I do not intend to grade your homework solutions; I will merely give you credit for handing in your best attempt by the due date. Late work will receive reduced credit.

Laboratory exercises: Some of our weekly assignments will include laboratory work. Labs will typically take up at least two class periods. Your laboratory notebook pages must be submitted by the assigned due date. More details about the required format and expectations will be discussed before the first laboratory period. You will need to order/purchase a dedicated laboratory notebook. Here are guildlines on what to include in your laboratory notebook.

Quizzes: We will have in-class quizzes almost every week on Monday. To prepare for quizzes, you should read the assigned book chapter (at least once), review the lecture material, complete all of the homework problems, and review the homework solutions.

Tests: We will have a midterm exam before the end of the first (and third) quarters and a comprehensive final examination before the end of the second (and fourth) quarters.

Software: Logger Pro 3.15 Is an excellent data analysis software package. Download for Wndows 10, 8.1, 7, and for macOS 10.14, 10.13, 10.12, 10.11, 10.10. For more details on how to download and install Logger Pro click here.